// Credits

Photo credits

Photos on this site are used under free licences from Wikimedia Commons and Openverse. Thank you to the photographers. Machine line drawings are our own.

A CO2 laser (an Epilog Legend 36EXT) cutting snowflakes from 2.5mm wood fibreboard
Photo: Andy Dingley, CC BY-SA 3.0
Finger-jointed cherry box with a laser-engraved circular pattern
Photo: Jared Tarbell, CC BY 2.0
A living hinge laser cut from plywood
Photo: Autopilot, CC BY-SA 3.0
Laser-cut holey cube in birch plywood with a mirrored sphere
Photo: Jared Tarbell, CC BY 2.0
Thin plywood components fresh off a laser cutter
Photo: Jared Tarbell from Awesometown, United States of America, CC BY 2.0
Marshmallow catapult made from laser-cut plywood, Maker Faire Berlin 2018
Photo: Matti Blume, CC BY-SA 4.0
Laser-cut clear acrylic project box for an Arduino
Photo: oomlout, CC BY-SA 2.0
A small 3D printer farm at Hackerspace Wrocław (Prusa MK3S+ and MINI printers)
Photo: Majabojarska, CC BY 4.0
1.75mm FDM filament in a range of colours
Photo: Suit, CC BY-SA 4.0
A 3D-printed lattice bear
Photo: Robin Zitt, CC BY-SA 4.0
An enclosed FDM printer printing green model parts
Photo: Shixart1985, CC BY 2.0
A 3D printer in a home-made enclosure at Bristol Hackspace
Photo: penyuan, CC BY-SA 2.0
Cleaning a flexible build plate with isopropyl alcohol at Bristol Hackspace
Photo: penyuan, CC BY-SA 2.0
Laser safety goggles rated for 190–540nm at OD4+ (blue and green lasers)
Photo: Карма2, CC BY-SA 4.0
The layered edge of a plywood board
Photo: Rotor DB at English Wikipedia, CC BY-SA 3.0
An Original Prusa MK4 FDM 3D printer
Photo: Majkluss, CC BY-SA 4.0
The wood workshop at Bristol Hackspace
Photo: penyuan, CC BY-SA 2.0