INDEPENDENT GUIDE · glowforge.uk is an independent guide. It is not affiliated with, endorsed by or connected to Glowforge Inc. Glowforge is a trademark of Glowforge Inc.
glowforge.ukThe independent UK guide to Glowforge, laser cutters & 3D printers
Menu

// Side by side

Compare machines

Pick up to three laser cutters, engravers or 3D printers. Every figure comes from the maker’s own pages; blank means the maker doesn’t say.

Specifications compared
Resin 3D printerAnycubic Photon Mono M7 Pro
TypeResin 3D printer
TechnologyMSLA resin, 10.1-inch 14K mono LCD (13312×5120), LighTurbo 3.0 light source, heated resin tank
Build volume223.6 × 126.5 × 230 mm
Multi-colourNo
Bed levellingPressure-sensing levelling (flexibly mounted screen assembly; print starts once preset pressure is detected)
Max speed (as stated)130 mm/h with standard resin; up to 170 mm/h with high-speed resin
SoftwareAnycubic Photon Workshop
ConnectivityUSB drive (.pwsz files)
Strengths
  • 14K LCD; XY 16.8×24.8 μm, Z 0.01 mm (Anycubic figures)
  • Resin heating to about 25 °C
  • Automatic resin loading/unloading device
  • No manual levelling routine (pressure-sensing)
Things to consider
  • Anycubic's FAQ says to wear a mask and gloves when pouring resin; keep the room ventilated (Prusa KB) and plan for rinsing and UV post-curing
  • Auto-loading and air purification share one USB power port, so only one runs at a time
  • Weight, Wi-Fi and release date not verified
Who it suitsHobbyists printing miniatures and detailed parts who want automated resin handling at mid-size.
Where to buyView on Amazon.co.uk

Rows shaded orange differ between the machines. As an Amazon Associate I earn from qualifying purchases.